Back to homeA practical starting point

A few measurements.
A clearer conversation.

You don’t need a finished specification to ask for a quote. An approximate opening size, a few photos and the room’s purpose are a good start.

Measure the full opening width between jambs and height from finished floor to underside of headOpening widthOpening heightFinished floor level
Opening guide · Schematic only, not to scale
01

Measure the opening, not the old door.

Record the width between the jambs and the height from the finished floor to the underside of the head, in millimetres. Note any changes in width or floor level.

02

Photograph the full opening.

Take a clear photo from each side. Include the head above, the floor below and the space beside the opening where the door or panels would stack.

03

Tell us how the room will work.

Mention whether both sides will be used at once, any sound privacy needed, and whether this is a new build, replacement or repair.

04

Leave the final check to the measure.

Approximate figures are enough for a first discussion. Structural support, final tolerances and site details are confirmed before manufacture.

No measurements yet?

Start with the location and what you want the room to do.