All practical guidesChoosing an internal door

Concertina, bifold or sliding doors for an internal opening?

The useful question is where the door goes when it is open. A concertina door needs stacking room, a bifold needs clearance for its folded leaves, and a sliding door needs somewhere to slide. Start with the opening and everyday access, then choose the mechanism that fits.

Compare the space each mechanism needs

This guide compares internal room and cupboard doors. An external opening needs a separate weather and security specification. Our workshop makes made-to-measure accordion and concertina doors; the bifold and sliding columns below explain alternative mechanisms to help you choose the right type.

Swipe sideways, or focus this table and use the arrow keys, to compare the doors.

Internal concertina, bifold and sliding door comparison
What to checkConcertina / accordionInternal bifoldInternal sliding
Where the open door goesNarrow connected leaves fold into a stack beside a jamb.Hinged leaves fold together and project to one side of the opening.A leaf slides beside the opening or into a purpose-designed wall pocket.
Space around the openingAllow for the folded stack and check the usable clear opening.Check the swing and folded-panel clearance against appliances, furniture and walkways.Check the clear wall run, or the construction needed for a pocket.
Floor detailingOur top-hung accordion system has no floor track; finished floor levels and clearances still matter.Pivots, guides or tracks depend on the selected kit and configuration.Floor guides and track details depend on the selected sliding system.
Support and fixingsConfirm the overhead support, jambs, finished opening and proposed stack position.Confirm the frame, hinges or pivots, track fixings and clearances for the chosen system.Confirm the head support, guide arrangement and unobstructed slide or pocket space.
Privacy and soundA standard accordion door gives visual privacy and light sound separation, not a rated acoustic wall.Do not infer acoustic performance from the leaf material alone; the complete door and seals matter.Do not infer acoustic performance from the leaf material alone; gaps and the complete system matter.

For a laundry, start with appliance access

A door can close a laundry neatly and still make it awkward to use. Check the opening with the appliance doors, drawers and nearby cupboard doors fully open. The handle, folded stack or sliding leaf should not obstruct the access the appliance needs.

  • Measure the clear opening width and height, not only the appliance width.
  • Mark where a concertina stack, folded bifold or sliding leaf would sit when the opening is in use.
  • Check access to controls, taps and service points, as well as the route for removing an appliance.
  • Follow the appliance manufacturer’s ventilation and access instructions when planning an enclosed laundry.

A laundry concertina door can be worth discussing where a full swinging leaf is awkward, but the folded stack still occupies part of the opening. Check the remaining clear width before selecting the door. Do not assume that a folding mechanism leaves the whole opening unobstructed.

For a study or room divider, separate privacy from sound

Closing a view into a room is different from making two rooms acoustically independent. Our standard concertina doors provide visual privacy and light sound separation; they are not acoustic-rated walls. A bifold or sliding leaf should not be treated as soundproof just because its face is solid.

If people need to teach, meet or work on both sides at once, discuss the required acoustic outcome and an appropriate operable wall. The head, floor, surrounding construction and seals affect the finished result. Read the Rw planning guide before choosing a system by a rating alone.

When an accordion or concertina door is a useful starting point

Accordion and concertina describe the same connected folding system in our range. The door runs on an overhead track without a floor track and is made to the agreed opening. Vinyl, fabric and timber finish options can be discussed for the room and the way the door will be used.

It is a useful system to consider for internal laundries, pantries, studies and wider room divisions when there is somewhere for the folded stack. Confirm the support and operating arrangement with the workshop rather than choosing from the width alone. See the concertina door guide for the product-family ranges and finish information.

Measure the opening and the space around it

  • Clear width between the finished jambs and height from the finished floor to the underside of the head.
  • The space beside the opening and any appliances, furniture, switches or adjacent doors that affect operation.
  • A photograph of the opening from both sides, the overhead support, jambs and finished floor.
  • Which side the door should park on and how much clear opening is needed in daily use.
  • The site suburb and whether you want supply-only or installation discussed.

Use the opening enquiry checklist and typical accordion-door planning specifications to prepare the first conversation. Rough measurements can start an enquiry; final dimensions, support, tolerances and installation responsibilities need to be agreed before manufacture.

Plan the supply and installation responsibilities

For supply-only work, agree who is responsible for final measurements and fitting. For work installed by our team, the opening is checked before manufacture. Installation, travel and access depend on the location and project; the Melbourne workshop confirms that scope in the quote.

Tell us what is difficult about the opening: a lack of swing space, a narrow appliance opening, the need for visual privacy or a room that must work in two ways. Those details are more useful than choosing a door name first.

Read next

Let’s work through your opening.

Tell us the location and what the room needs to do. We’ll discuss the next step.